If you're using it in a fully manual mode (which it rather sounds like), the usual old-fashioned approach is to figure from the guide number, which should be available on the flash or in it's manual. The basic rule is that, for a properly exposed shot assuming direct flash illumination, the distance to the subject multiplied by the f stop should equal the guide number.

According to another thread, this magic number (for ISO 100) is 138 for this flash, so a subject 15 feet away would require an aperture setting of 138/15 or f9.2 (at full flash power). For bounce or multiple-flash setups, there are too many variables to do more than form an initial guestimate for manual work.

Bhimbetka Cave Paintings Pdf Merge. A full information LCD panel on the back of the electronic flash head shows the auto check indicator, flash mode setting indicator, straight/bounce head flash head indicator, flash power level setting, zoom head position, auto/manual zoom, and flash range distance bars. The Promaster FTD7000M has been mated with. May 31, 2013. I recently purchased a used Promaster FTD 7000M on ebay. On the K-5 and K-5 IIs it is unresponsive in any mode, Manual or otherwise. In August 2010, Promaster stated that they were working on an update for the 7200EDF and 7400EDF, but more than a year later, that has not happened.

Digital cameras are very nice here--you can shoot a test shot, look at the histogram, and apply a correction if needed.

Description • The Promaster FTD7000M Flash enables Nikon users to utilize many features and exercise creative control over the flash settings in their photography. With a motorized zoom flash head, close up and zoom photography is made easier. A full information LCD panel on the back of the electronic flash head shows the auto check indicator, flash mode setting indicator, straight/bounce head flash head indicator, flash power level setting, zoom head position, auto/manual zoom, and flash range distance bars.

The Promaster FTD7000M has been mated with Nikon cameras to allow for seamless operation and attaches to the camera via the hot shoe. The device operates with four AA batteries which should be removed if storing the electronic flash to prevent acid leakage.

With an AF Illuminator, the Promaster FTD7000M Flash automatically senses low-light and low-contrast situations and adjusts accordingly. The device also offers five different flash modes, as well as a manual mode, for photographers who wish to exercise more creative control over the lighting in their shots. There is also an auto power-off setting on the Promaster FTD7000M that engages after five minutes to save power. Additionally, the device is equipped with a slave flash mode to enable flashing when disconnected from the camera. Ebusiness And Ecommerce Management Dave Chaffey Pdf File there. The Promaster FTD7000M Flash boasts a guide number of 138 (100 iso), lending plenty of light to all photographic settings.